Zippo España. Foro oficial
Foro de Zippos => Mantenimiento, Reparación, Consejos => Mensaje iniciado por: omgargon en Mayo 19, 2020, 14:38:46 pm
-
Acabo de comprarme un insert de doble llama original de zippo y cuando intento volver a sacarlo de un zippo me es imposible, ¿algún truco que pueda utilizar?
-
Prueba tirando de la leva de la tapa,
no se si te servira, a mi me ha salido pero tira con mucho cuidado
-
No tires presionando en el centro del insert. Puedes romper el mecanismo... :undecided:
-
Gracias a los dos por vuestros consejos pero no he conseguido sacarlo. Me parece una estafa que un insert nuevo en un zippo original no se pueda sacar y meter con más facilidad, la verdad que no sé qué hacer.
-
La verdad es que al menos yo, tenemos poca experiencia con estos inserts porque son muy muy nuevos. Llévalo a un estanco para que te lo carguen, a ver que hacen....igual ellos tienen la solución...
-
Esa es una muy buena idea, probaré el estanco ver que tal.
-
lamentablemente no puedo entender eso, funciona en 360 Multicut absolutamente sin ningún problema. Con el uso original, todavía es más fresco
-
Con mucho esfuerzo logré sacar el insert pero ahora no me atrevo a ponerlo en mis zippos por miedo a que vuelva a pasar lo mismo. ¿Le podría echar un poco de vaselina para facilitar las cosas?
-
Pues supongo que sí..... no lo he probado nunca....
-
Ok, gracias. Probaré con la vaselina a ver que tal
-
I don't think it's in the inventor's mind. Don't you have another Zippo where you can test it? I tested it in 5 Zippo. No problems in 360 Armor Multicut, 2 regular and even in a 1935 replica and a 1941 replica. In the 1935 and 1941 it does not fit exactly, but can be removed again without problems. I would rather go to a dealer and complain. or something is wrong with the Zippo housing
-
A mí también me costó sacar el mío de un silver plate regular. Algo deben tener...que no cuadran en ocasiones. Basta una diferencia de 1/4 de milimetro para ya cueste mucho sacarlo...
-
I don't think it's in the inventor's mind. Don't you have another Zippo where you can test it? I tested it in 5 Zippo. No problems in 360 Armor Multicut, 2 regular and even in a 1935 replica and a 1941 replica. In the 1935 and 1941 it does not fit exactly, but can be removed again without problems. I would rather go to a dealer and complain. or something is wrong with the Zippo housing
Lo he probado en un armor y dos regulares. Tengo bastantes zippos pero me da pereza que me vuelva a pasar. Cada vez que he puesto el insert en un zippo me las hesito y deseado para poder sacarlo.
-
I understand that. I would be scared too. I have this insert and absolutely no problems. I'm lucky in this case, it seems.
Nevertheless, I prefer the original with petrol. But nice to have an option for gas
-
I understand that. I would be scared too. I have this insert and absolutely no problems. I'm lucky in this case, it seems.
Nevertheless, I prefer the original with petrol. But nice to have an option for gas
Ese no es un insert original de zippo con el que tengo problemas. Yo me refiero a estos:
(https://i.ibb.co/fS3rJRn/butane-lighter-insert-single-torch-3.jpg) (https://ibb.co/fS3rJRn) (https://i.ibb.co/59j0ksP/butane-lighter-insert-single-torch.jpg) (https://ibb.co/59j0ksP)
-
ahhh, problem found. Mine is not from Zippo, but it works better than the original in the Zippo. hahaha. Zippo ashamed of you >:(. at least it is now clear why I have no problems :o. Sorry for the misunderstanding, I idiot just read the Z.
-
ahhh, problem found. Mine is not from Zippo, but it works better than the original in the Zippo. hahaha. Zippo ashamed of you >:(. at least it is now clear why I have no problems :o. Sorry for the misunderstanding, I idiot just read the Z.
Zippo debería pedirle consejo al que fabricó el tuyo para ahorrarse problemas. :grin:
-
Bien, solo se deben usar insert originales 8)